1553 Bus Data Attributes Group (B)
PARAMETER MAXIMUM FIELD SIZE CODENAME DEFINITION XML Element
        <!--  B section   --> 
DATA LINK NAME 32 B-x\DLN IDENTIFY THE DATA LINK CONSISTENT WITH THE MULTIPLEX/MODULATION GROUP.  THE PCM FORMAT OF THE DATA STREAM SHALL BE DEFINED IN THE PCM FORMAT ATTRIBUTES GROUP. <BusAttributes>
TEST ITEM 16 B-x\TA TEST ITEM DESCRIPTION IN TERMS OF NAME, MODEL, PLATFORM, OR IDENTIFICATION CODE THAT CONTAINS THE DATA ACQUISITION SYSTEM. <TestItem />
<Bus Number="" Name="" Type="">
  <RecordingDescription>
    <TrackSequence />
  </RecordingDescription>
  <Message Name="" Number="">
    <RemoteTerminal>
      <Name />
      <Address />
    </RemoteTerminal>
    <SubTerminal>
      <Name />
      <Address />
    </SubTerminal>
    <TransmitReceiveMode />
    <DataWordCount />
    <SpecialProcessing />
    <ArincMessageDefinition>
      <Label />
      <Code />
    </ArincMessageDefinition>
    <RTRTReceiveCommandList>
      <RemoteTerminal>
        <Name />
        <Address />
      </RemoteTerminal>
      <SubTerminal>
        <Name />
        <Address />
      </SubTerminal>
      <DataWordCount />
    </RTRTReceiveCommandList>
    <ModeCode>
      <Description />
      <DataWordDescription />
    </ModeCode>
    <Measurement Name="" Parity="" ParityTransferOrder="">
      <Location FragmentNumber="">
        <WordNumber />
        <BitMask />
        <TransferOrder />
      </Location>
    </Measurement>
  </Message>
</Bus>
NUMBER OF BUSES 1 B-x\NBS\N SPECIFY THE NUMBER OF BUSES INCLUDED WITHIN THIS DATA LINK.
BUS NUMBER 3 B-x\BID-i ENTER THE BUS NUMBER AS A BINARY STRING.
BUS NAME 32 B-x\BNA-i SPECIFY THE BUS NAME
BUS TYPE 8 B-x\BT-i SPECIFY THE BUS TYPE (1553 BUS = '1553 ARINC 429 BUS - 'A429')
RECORDING DESCRIPTION  
NUMBER OF TRACKS 2 B-x\TK\N-i ENTER THE NUMBER OF TAPE TRACKS USED TO RECORD DATA.  ANY ENTRY GREATER THAN ONE INDICATES THAT THE DATA HAS BEEN SPREAD ACROSS MULTIPLE TRACKS.
TRACK SEQUENCE 3 B-x\TS-i-k IN THE FOLLOWING ENTRIES GIVE THE SEQUENCE ORDER OF TAPE TRACKS THAT SHOULD BE USED TO RECOVER THE DATA STREAM IN THE CORRECT ORDER.  (THE ORDER GIVEN SHOULD CORRESPOND TO THE  ACTUAL SKEW OF THE DATA ON THE TAPE.)
MESSAGE CONTENT DEFINITION  
NUMBER OF MESSAGES 8 B-x\NMS\N-i THE NUMBER OF MESSAGESTO BE DEFINED.
MESSAGE NUMBER 8 B-x\MID-i-n THE MESSAGE NUMBER THAT CONTAINS THE FOLLOWING DATA.
MESSAGE NAME 32 B-x\MNA-i-n SPECIFY THE MESSAGE NAME.
REMOTE TERMINAL NAME 32 B-x\TRN-i-n ENTER THE NAME OF THEREMOTE TERMINAL THAT IS SENDING OR RECEIVING THIS MESSAGE. FOR RT/RT, SPECIFY THE SENDING REMOTE TERMINAL NAME.
REMOTE TERMINAL ADDRESS 5 B-x\TRA-i-n SPECIFY THE FIVE BIT REMOTE TERMINAL ADDRESS FOR THIS MESSAGE.
SUBTERMINAL NAME 32 B-x\STN-i-n ENTER THE NAME OF THE SUBTERMINAL THAT IS SENDING OR RECEIVING THIS MESSAGE.
SUBTERMINALADDRESS 5 B-x\STA-i-n SPECIFY THE FIVE BIT SUBTERMINAL ADDRESS FORTHIS MESSAGE.
TRANSMIT/RECEIVE MODE 1 B-x\TRM-i-n INDICATE IF THIS COMMAND WORD IS A TRANSMIT OR RECEIVE COMMAND. FOR RT/RT, SPECIFY TRANSMIT.   TRANSMIT - '1'   RECEIVE - '0'
DATA WORD COUNT/MODE CODE 5 B-x\DWC-i-n ENTER THE NUMBER OF DATA WORDS AS A BINARY STRING, USING X TO INDICATE A "DON'T CARE" VALUE.  IF THE SUBTERMINAL ADDRESS INDICATES A MODE CODE, ENTER THE MODE CODE VALUE AS A BINARY STRING.
SPECIAL PROCESSING 200 B-x\SPR-i-n PROVIDE ANY SPECIAL PROCESSING REQUIREMENTSPERTAINING TO THISMESSAGE.
ARINC 429 MESSAGE DEFINITIONS  
ARINC 429 LABEL 8 B-x\LBL-i-n ENTER THE NAME OF THE REMOTE TERMINAL THAT IS RECEIVING THIS RT/RTMESSAGE.
ARINC 429 SDI CODE 3 B-x\SDI-i-n SPECIFY THE TWO-BIT ARINC 429 SDI CODE FOR THIS MESSAGE:
    ALL SDI – ‘ALL’
    SDI CODE 0 – ‘0’
    SDI CODE 1 – ‘1’
    SDI CODE 2 – ‘2’
    SDI CODE 3 – ‘3’
RT/RT RECEIVE COMMAND LIST  
REMOTE TERMINAL NAME 32 B-x\RTRN-i-n-m ENTER THE NAME OF THE REMOTE TERMINAL THAT IS RECEIVING THIS RT/RTMESSAGE.
REMOTE TERMINAL ADDRESS 5 B-x\RTRA-i-n-m SPECIFY THE FIVE BIT REMOTE TERMINAL ADDRESS FOR THIS RT/RT MESSAGE.
SUBTERMINAL NAME 32 B-x\RSTN-i-n-m ENTER THE NAME OF THE SUB-TERMINAL THAT IS RECEIVING THIS RT/RT MESSAGE.
SUBTERMINAL ADDRESS 5 B-x\RSTA-i-n-m SPECIFY THE FIVE BIT SUBTERMINAL ADDRESS FOR THIS RT/RT MESSAGE.
DATA WORD COUNT 5 B-x\RDWC-i-n-m ENTER THE NUMBER OF DATA WORDS AS A BINARY STRING, USING X TO INDICATE A "DON'T CARE" VALUE.  EXCLUDE STATUS AND TIME WORDS.  (AN RT/RT MESSAGE CANNOT CONTAIN A MODE CODE.)
MODE CODE  
MODE CODE DESCRIPTION 200 B-x\MCD-i-n DESCRIBE THE FUNCTION OR ACTION ASSOCIATED WITH THIS MODE CODE.
MODE CODE DATA WORD DESCRIPTION 200 B-x\MCW-i-n IF THE MODE CODE HAS AN ASSOCIATED DATA WORD FOLLOWING THE MODE CODE COMMAND, PROVIDE A COMPLETE DESCRIPTION OF THE DATA WORD.
MEASUREMENT DESCRIPTION SET  
NUMBER OF MEASURANDS 4 B-x\MN\N-i-n SPECIFY THE NUMBER OF MEASURANDS.
MEASUREMENT NAME 32 B-x\MN-i-n-p MEASURAND NAME.
PARITY 2 B-x\MN1-i-n-p NORMAL WORD PARITY.
EVEN - 'EV'
ODD - 'OD'
NONE - 'NO'.
PARITY TRANSFER ORDER 1 B-x\MN2-i-n-p PARITY BIT LOCATION
LEADS WORD - 'L'
TRAILS WORD - 'T'.
MEASUREMENT LOCATION  
NUMBER OF MEASUREMENT LOCATIONS 2 B-x\NML\N-i-n-p IF THIS MEASUREMENT IS CONTAINED IN ONE WORD, ENTER '1'.  IF THIS MEASUREMENT IS FRAGMENTED, ENTER THE NUMBER OF FRAGMENTS.
MESSAGE WORD NUMBER 3 B-x\MWN-i-n-p-e ENTER THE NUMBER CORRESPONDING TO THE DATA WORD COUNT WITHIN A MESSAGE THAT CONTAINS THE MEASUREMENT OR THE FRAGMENTED MEASURAND.
BIT MASK 64 B-x\MBM-i-n-p-e BINARY STRING OF 1s AND 0s TO IDENTIFY THE BIT LOCATIONS THAT ARE ASSIGNED TO THIS MEASURE-MENT IN THE WORD IDENTIFIED ABOVE.  IF THE FULL WORD IS USED FOR THIS MEASUREMENT, ENTER 'FW'.  LEFT MOST BIT CORRESPONDS TO FIRST BIT TRANSMITTED.
TRANSFER ORDER 3 B-x\MTO-i-n-p-e SPECIFY IF THE START BIT IS   MOST SIGNIFICANT - 'MSB'   LEAST SIGNIFICANT - 'LSB'
FRAGMENT POSITION 1 B-x\MFP-i-n-p-e A NUMBER FROM 1 TO N THAT SPECIFIES THE POSITION OF THE FRAGMENT WITHIN THE RECONSTRUCTED BINARY DATA WORD.(1 CORRESPONDS TO THE MOST SIGNIFICANT FRAGMENT)
REPEAT THE ABOVE TO DESCRIBE EACH FRAGMENT OF A FRAGMENTED WORD. THE TRANSFER ORDER INDICATES WHETHER TO TRANSPOSE THE ORDER OF THE BIT SEQUENCE OR NOT (LSB INDICATES TO TRANSPOSE THE BIT SEQUENCE).    
COMMENTS    
COMMENTS 3200 B-x\COM PROVIDE ANY ADDITIONAL INFORMATION REQUIRED OR DESIRED. <Comments />