Tape Source Attributes (R) | ||||
PARAMETER | MAXIMUM FIELD SIZE | CODENAME | DEFINITION | XML Element |
<!-- R section --> | ||||
DATA SOURCE ID | 32 | R-x\ID | DATA SOURCE ID CONSISTENT WITH GENERAL INFORMATION GROUP. | <TapeAttributes DataSource=""> |
TAPE ID | 32 | R-x\RID | TAPE IDENTIFICATION. | <TapeID /> |
TAPE DESCRIPTION | 32 | R-x\R1 | TAPE REEL NUMBER OR OTHER DEFINITION. | <TapeDescription /> |
TAPE CHARACTERISTICS | <TapeCharacteristics> <Type /> <Manufacturer /> <Code /> <Width /> <Housing /> <TypeOfTracks /> <NumberOfTracks /> <RecordSpeed /> <DataPackingDensity /> <Rewound /> </TapeCharacteristics> |
|||
TAPE TYPE | 4 | R-x\TC1 | SPECIFY THE TAPE TYPE: ANALOG - 'ANAL'CASSETTE - 'CASS'HDDR - 'HDDR'PARALLEL - 'PARA'OTHER - 'OTHR', DEFINE IN COMMENTS RECORD. | |
TAPE MANUFACTURER | 8 | R-x\TC2 | NAME OF MANUFACTURER OF THE TAPE. | |
TAPE CODE | 8 | R-x\TC3 | SPECIFY MANUFACTURER'S TAPE DESIGNATION CODE. | |
TAPE WIDTH | 4 | R-x\TC4 | PHYSICAL DIMENSION OF TAPE WIDTH, IN. | |
TAPE HOUSING | 5 | R-x\TC5 | STATE
THE REEL SIZE, INCHES: '10.5' '14.0' '15.0''16.0' 'OTHER'STATE THE CASSETTE SIZE, MM: '12.65' '19.0' 'OTHER' |
|
TYPE OF TRACKS | 2 | R-x\TT | STATE THE TYPE OF TRACKS ON THE TAPE:LONGITUDINAL - 'LO'ROTARY - 'RO' | |
NUMBER OF TRACKS | 2 | R-x\N | STATE THE NUMBER OF TRACKS ON THE TAPE. | |
RECORD SPEED | 4 | R-x\TC6 | STATE RECORD SPEED IN INCHES PER SECOND. | |
DATA PACKING DENSITY | 2 | R-x\TC7 | STATE RECORDING SYSTEM BANDWIDTH: INTERMEDIATE BAND - 'IM' WIDE BAND - 'WB' DOUBLE DENSITY - 'DD' OTHER - 'OT' | |
TAPE REWOUND | 1 | R-x\TC8 | YES - 'Y' NO - 'N' | |
RECORDER INFORMATION | <RecorderInfo> <Manufacturer /> <Model /> <OriginalTape /> <DateAndTimeCreated /> <CreatingOrganizationPointOfContact Name= Agency= Address= Telephone= /> <DateOfDub /> <DubbingOrganizationPointOfContact Name= Agency= Address= Telephone= /> </RecorderInfo> |
|||
TAPE DRIVE MANUFACTURER | 8 | R-x\RI1 | NAME OF TAPE DRIVE MANUFACTURER | |
TAPE DRIVE MODEL | 8 | R-x\RI2 | MANUFACTURER'S MODEL NUMBER OF TAPE DRIVE USED TO CREATE THE TAPE. | |
ORIGINAL TAPE | 1 | R-x\RI3 | YES - 'Y' NO - 'N' | |
DATE AND TIME CREATED | 19 | R-x\RI4 | DATE AND TIME TAPE WAS CREATED:DD - DAY MM - MONTHYYYY - YEAR HH - HOURMI - MINUTE SS - SECOND (MM-DD-YYYY-HH-MI-SS) | |
CREATING ORGANIZATION POINT OFCONTACT: NAME AGENCY ADDRESS TELEPHONE |
24 48 48 20 |
R-x\POC1 R-x\POC2 R-x\POC3 R-x\POC4 |
POINT OF CONTACT AT THE FACILITY CREATING THE TAPE: NAME, ADDRESS, AND TELEPHONE. | |
DATE OF DUB | 10 | R-x\RI5 | DATE
THE DUB WAS MADE: DD - DAY MM - MONTHYYYY - YEAR (MM-DD-YYYY) |
|
DUBBING ORGANIZATION POINT OF CONTACT: NAME AGENCY ADDRESS TELEPHONE |
24 48 48 20 |
R-x\DPOC1 R-x\DPOC2 R-x\DPOC3 R-x\DPOC4 |
POINT OF CONTACT AT THE DUBBING AGENCY: NAME, ADDRESS, AND TELEPHONE | |
DATA (DEFINE INFORMATION CONTAINED ON EACH TRACK OF THE TAPE.) | ||||
TRACK NUMBER/CHANNEL ID | 2 | R-x\TK1-n | SPECIFY THE TRACK NUMBER OR THE CHANNEL ID THAT CONTAINS THE DATA TO BE SPECIFIED. | <Data> <TrackNumber /> <RecordingTechnique /> <DataSourceID /> <DataDirection /> <ChannelEnable /> <ChannelDataType /> And one of the following: <PcmDataTypeAttributes> <DataLink /> <DataPackingOption /> <TypeFormat /? </PcmDataTypeAttributes> <BusDataTypeAttributes> <DataLink /> </BusDataTypeAttributes> <AnalogDataTypeAttributes> <DataPackingOption /> <SampleRate /> <Channel> <MeasurementName /> <DataLength /> <BitMask /> <MeasurementTransferOrder /> <SampleFactor /> </Channel> </AnalogDataTypeAttributes> <DiscreteDataTypeAttributes> <DiscreteMode /> <SampleRate /> <Measurement Name=""> <BitMask /> <MeasurementTransferOrder /> </Measurement> </DiscreteDataTypeAttributes> <VideoDataTypeAttributes> <EncodingDelay /> </VideoDataTypeAttributes> <TimeDataTypeAttributes> <TimeFormat /> </TimeDataTypeAttributes> </Data> |
RECORDING TECHNIQUE | 6 | R-x\TK2-n | SPECIFY
THE RECORDING TECHNIQUE USED FOR THIS TRACK: FM/FM - 'FM/FM' HDDR - 'HDDR' PRE-DETECTION - 'PRE-D' DIRECT - 'DIRECT' FM-WIDE BAND GRP I - 'FMWBI' FM-WIDE BAND GRP II - 'FMWBII' FM-INTERMEDIATE BAND - FM-IM' FM-NARROW BAND - 'FM-NB' DOUBLE DENSITY - 'DOUDEN' ROTARY (SINGLE TRACK) - 'RO-K' ROTARY (MULTIPLEXED) - 'RO-MUX' SOLID STATE - 'SSR' OTHER - 'OTHER'. |
|
DATA SOURCE ID | 32 | R-x\DSI-n | SPECIFY THE DATA SOURCE IDENTIFICATION. FOR A SITE RECORDED MULTIPLEXED TRACK, PROVIDE A DATA SOURCE IDENTIFICATION. | |
DATA DIRECTION | 3 | R-x\TK3-n | FORWARD - 'FWD' REVERSE - 'REV' | |
CHANNEL ENABLE | 1 | R-x\CHE-n | INDICATES IF SOURCE IS ENABLED. SOURCE MUST BE ENABLED TO GENERATE DATA PACKETS. ‘T’ = TRUE, ‘F’ = FALSE | |
CHANNEL DATA TYPE | 6 | R-x\CDT-n | SPECIFY
THE TYPE OF SOURCE IF ‘STO’ WAS SPECIFIED IN G GROUP DATA SOURCE TYPE: PCM INPUT – ‘PCMIN’ ANALOG INPUT – ‘ANAIN’ DISCRETE INPUT – ‘DISIN’ IRIG TIME INPUT – ‘TIMEIN’ VIDEO INPUT – ‘VIDIN’, UART INPUT – ‘UARTIN’ 1553 INPUT – ‘1553IN’, ARINC 429 INPUT – ‘429IN’ MESSAGE DATA INPUT – ‘MSGIN’ IMAGE DATA INPUT – ‘IMGIN’ |
|
DATA TYPE ATTRIBUTES | ||||
PCM DATA TYPE ATTRIBUTES | ||||
DATA LINK NAME | 32 | R-x\PDLN-n | IDENTIFY THE DATA LINK NAME CONSISTENT WITH THE MUX/MOD GROUP FOR A PCM CHANNEL. | |
DATA PACKING OPTION | 3 | R-x\PDP-n | HOW
DATA IS PLACED IN THE PACKETS: UNPACKED – ‘UN’ PACKED WITH FRAME SYNC – ‘PFS’ THROUGHPUT MODE – ‘TM’ |
|
TYPE FORMAT | 5 | R-x\PTF-n | COMPRESSION TECHNIQUE FOR VIDEO RECORDED AS
STANDARD CHAPTER 4 PCM. THE COMPRESSED DATA IS ENCAPSULATED IN ISO STANDARD
TRANSPORT STREAM (TS) FRAMES. IF TYPE FORMAT IS ‘OTHER’, THEN A VENDOR SPEC
IS REQUIRED TO IDENTIFY THE DATA COMPRESSION TECHNIQUE. SPECIFY ‘NONE’ IF
DATA IS NOT VIDEO DATA. ‘NONE’ ‘MPEG1’ ‘MPEG2’ ‘H261’ ‘WAVE’ ‘OTHER’ |
|
BUS DATA TYPE ATTRIBUTES | ||||
DATA LINK NAME | 32 | R-x\BDLN-n | IDENTIFY THE DATA LINK NAME CONSISTENT WITH THE MUX/MOD GROUP FOR A BUS CHANNEL. | |
ANALOG DATA TYPE ATTRIBUTES | ||||
NUMBER OF ANALOG CHANNELS/PKT | 3 | R-x\ACH\N-n | SPECIFY THE NUMBER OF ANALOG CHANNELS PER PACKET. | |
DATA PACKING OPTION | 3 | R-x\ADP-n | HOW DATA IS PLACED IN THE PACKETS: PACKED – ‘YES’ UNPACKED – ‘NO’ |
|
SAMPLE RATE | 7 | R-x\ASR-n | SAMPLE RATE OF THE FASTEST CHANNEL(S) IN SAMPLES PER SECOND | |
MEASUREMENT NAME | 32 | R-x\AMN-n-m | IDENTIFY THE MEASUREMENT NAME CONSISTENT WITH THE MUX/MOD GROUP FOR AN ANALOG CHANNEL. | |
DATA LENGTH | 2 | R-x\ADL-n-m | NUMBER OF BITS PER DATA WORD | |
BIT MASK | 64 | R-x\AMSK-n-m | BINARY STRING OF 1s AND 0s TO IDENTIFY THE BITS IN A WORD LOCATION THAT ARE ASSIGNED TO THIS MEASUREMENT. IF THE FULL WORD IS USED FOR THIS MEASUREMENT, ENTER - ‘FW’. LEFT-MOST BIT CORRESPONDS TO FIRST BIT TRANSMITTED | |
MEASUREMENT TRANSFER ORDER | 1 | R-x\AMTO-n-m | MOST SIGNIFICANT BIT FIRST - ‘M’ LEAST SIGNIFICANT BIT FIRST - ‘L’ DEFAULT - ‘D’ |
|
SAMPLE FACTOR | 2 | R-x\ASF-n-m |
SPECIFY THE VALUE ‘N’ IN THIS FIELD. VALID VALUES ARE 0 TO 15 |
|
DISCRETE DATA TYPE ATTRIBUTES | ||||
DISCRETE MODE | 4 | R-x\DMOD-n | INDICATE THE MODE WHEREBY DISCRETE EVENTS ARE
PLACED IN THE PACKETS: ‘EV’ – EVENT MODE ‘SAMP’ – SAMPLE MODE |
|
SAMPLE RATE | 7 | R-x\DSR-n | SAMPLE RATE IN SAMPLES PER SECOND | |
NUMBER OF DISCRETE MEASUREMENTS | 3 | R-x\NDM\N-n | SPECIFY THE NUMBER OF DISCRETE MEASUREMENTS | |
MEASUREMENT NAME | 32 | R-x\DMN-n-m | IDENTIFY THE MEASUREMENT NAME FOR ONE OR MORE DISCRETE BITS | |
BIT MASK | 64 | R-x\DMSK-n-m | BINARY STRING OF 1s AND 0s TO IDENTIFY THE BITS IN A WORD LOCATION THAT ARE ASSIGNED TO THIS MEASUREMENT. IF THE FULL WORD IS USED FOR THIS MEASUREMENT, ENTER - ‘FW’. LEFT-MOST BIT CORRESPONDS TO FIRST BIT TRANSMITTED | |
MEASUREMENT TRANSFER ORDER | 1 | R-x\DMTO-n-m |
LEAST SIGNIFICANT BIT FIRST - ‘L’ DEFAULT - ‘D’ |
|
VIDEO DATA TYPE ATTRIBUTES | ||||
VIDEO ENCODING DELAY | 8 | R-x\VED-n | DELAY INTRODUCED BY VIDEO ENCODING HARDWARE IN MILLISECONDS | |
TIME DATA TYPE ATTRIBUTES | ||||
TIME FORMAT | 1 | R-x\TFMT-n | INDICATE THE FORMAT FOR THE IRIG TIME: IRIG-A– ‘A’ IRIG-B – ‘B’ IRIG-G – ‘G’ INTERNAL – ‘I’ NATIVE GPS TIME – ‘N’ UTC TIME FROM GPS – ‘U’ |
|
REFERENCE TRACK | ||||
NUMBER OFREFERENCE TRACKS | 1 | R-x\RT\N | SPECIFY THE NUMBER OF REFERENCE TRACKS. | <ReferenceTrack Number=""> |
TRACKNUMBER | 2 | R-x\RT1-n | STATE THE TRACK LOCATION OF THE REFERENCE SIGNAL. | |
REFERENCEFREQUENCY | 6 | R-x\RT2-n | FREQUENCY OF REFERENCE SIGNAL, kHz. | |
THERE WILL BE ONE TAPE SOURCE ATTRIBUTES GROUP FOR EACH TAPE SOURCE. | ||||
COMMENTS | ||||
COMMENTS | 3200 | R-x\COM | THIS RECORD IS TO BE USED TO PROVIDE THE ADDITIONAL INFORMATION REQUESTED AND TO PROVIDE ANY OTHER INFORMATION DESIRED. | <Comments /> |